FIX: The “/after” command is ignored when sending a fax via the SMTP Gateway Print ZTN2099 ID: ZTN2099 This Zetafax technical note applies to: Zetafax Server v17 Symptom When using the “/after” command either in the “To:” line or in the “Subject” line this command is ignored and the fax is sent immediately. This issue can be observed when using the following date formats for the “/after” command: - yy-MM-dd hh:mm:ss => (e.g.: /after=16-04-19 17:30:00) - yy-MM-dd => (e.g.: /after=16-04-19) - hh:mm:ss => (e.g.: /after=17:30:00) Cause This was caused by an issue when parsing the date from the “/after” command. Resolution This fault was corrected in a hotfix, which is available by contacting Equisys Technical Support and quoting the technote number ZTN2099. Status This behaviour was corrected in the hotfix detailed above. Last updated: 19th April 2016 (JC)